The only way we have been able to get a a non IEC 127 fuse (in a product) through Nemko certification to 60065 or 60950 is when the fuse is internal to the unit and we add a label saying "replace only with manufacturers part no. xyz".
Chris James Engineering Services Manager Dolby Labs Inc. -----Original Message----- From: Crabb, John [mailto:[email protected]] Sent: Thursday, September 30, 1999 10:00 AM To: 'Rick Loiselle'; [email protected] Subject: RE: IEC 127 fuse I am going on vacation (to Florida!) tonight, but just to stir things up, WHY ALL THESE NEVER-ENDING DISCUSSIONS ON IEC127 and UL FUSES. It IS possible to get products approved by UL and European agencies, without using different fuses. We buy power supplies and monitors, with UL and at least one European approval, and one common fuse. (Some with a 1 1/4" fuse, some with a 20 mm). So make it simple for yourself ! By the way, I have used a SIBA 1 1/4" fuse with IEC 127 characteristics, but with no approvals, in a "self-declared" product ! Regards, John Crabb, Development Excellence (Product Safety) , NCR Financial Solutions Group Ltd., Kingsway West, Dundee, Scotland. DD2 3XX E-Mail :[email protected] Tel: +44 (0)1382-592289 (direct ). Fax +44 (0)1382-622243. VoicePlus 6-341-2289. > -----Original Message----- > From: Rick Loiselle [SMTP:[email protected]] > Sent: 29 September 1999 14:57 > To: [email protected] > Subject: IEC 127 fuse > > Hello, > > We are looking for a 1 1/4", T5AL/250V, customer replaceable fuse for our > European Audio Amplifier unit, that meets IEC 127. > > Everyone that I've talked to so far (including the big USA Fuse Mfgr's) > recommend the 5x20mm fuse and fuseholder. The 5x20mm meets IEC 127, but > I'm trying to avoid changing the fuseholder. > > Do any of you know where I can find a 1 1/4" fuse, that meets IEC 127 (EN > 60127)? > > Best Regards, > Rick > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
