It is my understanding that the delay period is over for the IEC version. It is also my understanding that the 4 year period for the EN version does not start until 1 Jan. 2001.
Bob Heller ================================ "George, David L" <[email protected]> on 09/10/99 01:25:20 PM Please respond to "George, David L" <[email protected]> To: Benoit Nadeau <[email protected]> [email protected] cc: (bcc: Robert E. Heller/US-Corporate/3M/US) Subject: RE: Limits for Class D equipment in EN61000-3-2 Nadeau: The delay period is complete and the standard applies to products 50 Watts and above. However the actual application of the standard is up to the each country and how it is adopted. For example, in Europe the standard applies to only some products until 1 January 2001. On this date it will apply to all products covered by the standard. Dave George -----Original Message----- From: Benoit Nadeau [mailto:[email protected]] Sent: Tuesday, September 07, 1999 10:31 PM To: [email protected] Subject: Limits for Class D equipment in EN61000-3-2 Bonjour de Montreal, Section 7.4 of the EN61000-3-2 Standards specifies that : The limits given in table 3 are valid for all applications having an active input power > 75 W. No limit apply for equipment with an active input power up to and including 75 W. This lower limit of 75 W will be reduced to 50 W four year after the implementation date of this standard. Is this 4 year delay passed since the latest date by which the EN has to be implemented at national level (dop) was 1995-07-01 ? Please comment, -------------------------------------------------------------------------- Benoit Nadeau, ing. M.ing. (P.Eng., M.Eng) Gerant du Groupe Conformite (Conformity Group Manager) Matrox -------------------------------------------------------------------------- 1055, boul. St-Regis Dorval (Quebec) Canada H9P 2T4 Tel : (514) 822-6000 (x2475) FAX : (514) 822-6275 Internet : [email protected], --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
-----Original Message-----
From: Benoit Nadeau [mailto:[email protected]]
Sent: Tuesday, September 07, 1999 10:31 PM
To: [email protected]
Subject: Limits for Class D equipment in EN61000-3-2
Bonjour de Montreal,
Section 7.4 of the EN61000-3-2 Standards specifies that :
The limits given in table 3 are valid for all applications having an active input power > 75 W. No limit apply for equipment with an active input power up to and including 75 W. This lower limit of 75 W will be reduced to 50 W four year after the implementation date of this standard.
Is this 4 year delay passed since the latest date by which the EN has to be implemented at national level (dop) was 1995-07-01 ?
Please comment,
--------------------------------------------------------------------------
Benoit Nadeau, ing. M.ing. (P.Eng., M.Eng)
Gerant du Groupe Conformite (Conformity Group Manager)
Matrox
--------------------------------------------------------------------------
1055, boul. St-Regis
Dorval (Quebec) Canada
H9P 2T4
Tel : (514) 822-6000 (x2475)
FAX : (514) 822-6275
Internet : [email protected],
--------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
