Hi group. Note that for products not within the scope of EN 60555-2&3 (household appliances etc.),the generic standards give presumption until Jan.1,2001(i.e.,for the time being there are no mandatory requirements for harmonics and flicker).
Regards. ----- Original Message ----- From: Benoit Nadeau To: [email protected] Sent: Wednesday, September 08, 1999 11:31 AM Subject: Limits for Class D equipment in EN61000-3-2 Bonjour de Montreal, Section 7.4 of the EN61000-3-2 Standards specifies that : The limits given in table 3 are valid for all applications having an active input power > 75 W. No limit apply for equipment with an active input power up to and including 75 W. This lower limit of 75 W will be reduced to 50 W four year after the implementation date of this standard. Is this 4 year delay passed since the latest date by which the EN has to be implemented at national level (dop) was 1995-07-01 ? Please comment, -------------------------------------------------------------------------- Benoit Nadeau, ing. M.ing. (P.Eng., M.Eng) Gerant du Groupe Conformite (Conformity Group Manager) Matrox <http://www.matrox.com/> -------------------------------------------------------------------------- 1055, boul. St-Regis Dorval (Quebec) Canada H9P 2T4 Tel : (514) 822-6000 (x2475) FAX : (514) 822-6275 Internet : [email protected], <mailto:[email protected]> --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
