Interesting. A thorough reading of clause 6.2 indicates that "a written
notice indicating compliance ....in the form of a label..." must be used.
Then it says, " A suggested text for the notice, in English and in French,
is provided in the Annex." I always understood that the wording could be
changed, but it never occurred to me that French was optional. However,
there is nothing in the text that says that either or both languages are
required. Thanks for catching that.
----------
From: Benoit Nadeau [SMTP:[email protected]]
Sent: Tuesday, March 23, 1999 10:37 AM
To: WOODS, RICHARD; [email protected]
Subject: RE: EMC Canada
Bonjour,
ICES-003 requires a special statement for the Canadian market but
this
statement could be in english only or in french only or both.
Regards,
At 08:28 23-03-99 -0500, WOODS, RICHARD wrote:
>For digital devices, the emissions limits are the same for Canada
as they
>are for the USA. Industry Canada is the controlling agency and the
>specification for digital devices is ICES-003 Issue 2, Revision 1.
I believe
>that you can find the document on line. A special statement is
required on
>the device in English and French. You may self-test and no
submission is
>required.
>
> ----------
> From: [email protected]
[SMTP:[email protected]]
> Sent: Sunday, March 21, 1999 9:17 PM
> To: [email protected]
> Subject: EMC Canada
>
> Can anybody advise the EMC requirements for power
supply units
>(desk
> top and stand alone adaptors) shipping to Canada. Is
there any
>logo
> required? Should the tests be done in the accredited
test lab,
>if so,
> is HOKLAS accredited lab accepted?
>
> Thanks and regards,
>
> Roger Hsu
>
>
> ---------
> This message is coming from the emc-pstc discussion list.
> To cancel your subscription, send mail to [email protected]
> with the single line: "unsubscribe emc-pstc" (without the
> quotes). For help, send mail to [email protected],
> [email protected], [email protected], or
> [email protected] (the list administrators).
>
>---------
>This message is coming from the emc-pstc discussion list.
>To cancel your subscription, send mail to [email protected]
>with the single line: "unsubscribe emc-pstc" (without the
>quotes). For help, send mail to [email protected],
>[email protected], [email protected], or
>[email protected] (the list administrators).
>
>
>
--------------------------------------------------------------------------
Benoit Nadeau, ing. M.ing. (P.Eng., M.Eng)
Gerant du Groupe Conformite (Conformity Group Manager)
Matrox <http://www.matrox.com/>
--------------------------------------------------------------------------
1055, boul. St-Regis
Dorval (Quebec) Canada
H9P 2T4
Tel : (514) 822-6000 (x2475)
FAX : (514) 822-6275
Internet : [email protected], <mailto:[email protected]>
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).
