Joe,
UL uses super glue to attach the thermocouple.
Dan Kinney
Horner APG
> -----Original Message-----
> From: Joe Finlayson [SMTP:jfinlay...@telica.com]
> Sent: Friday, December 15, 2000 2:53 PM
> To: 'NEBS Newsgroup'; 'EMC PSTC'
> Subject: Thermocouple issues
>
>
>
> I am in the process of performing a thermal evaluation and am using
> thermocouples to measure surface temperatures of IC's, etc. I'm finding
> that the thermocouple tape that I'm using tends to experience a
> degradation
> of the adhesive as the temperatures increase (in the 80-100°C range)
> causing
> the thermocouples to separate from the surfaces. I'd appreciate any
> advice
> that could point to a higher performing tape/adhesive for such an
> application. Some of the IC's are quite small which doesn't leave much
> surface area for adhesion and I am using as many as 40 thermocouples per
> card.
>
> Thx,
>
>
> Joe
>
> *********************************
> <<...>>
>
> Joe Finlayson
> Manager, Compliance Engineering
> Telica, Inc.
> 734 Forest Street, Bldg. G, Suite 100
> Marlboro, MA 01752
> Tel: (508) 480-0909 x212
> Fax: (508) 480-0922
> Email: jfinlay...@telica.com
> Web: www.telica.com
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> To cancel your subscription, send mail to:
> majord...@ieee.org
> with the single line:
> unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
> Jim Bacher: jim_bac...@mail.monarch.com
> Michael Garretson: pstc_ad...@garretson.org
>
> For policy questions, send mail to:
> Richard Nute: ri...@ieee.org
>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: jim_bac...@mail.monarch.com
Michael Garretson: pstc_ad...@garretson.org
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
