There are a number of labs The List of Approved EMC Designated Laboratories is at : http://www.bsmi.gov.tw/english/emc/e_emc_09.htm
We use: Unisys PCTC Unisys Product ComplianceTest Center, 2476 Swedesford Rd. Malvern, PA 19355 USA Contact: Daniel J Mis, [email protected] Best regards, Terry J. Meck Senior Compliance/Test Engineer Phone:215-721-5280 Fax:215-721-5551 hard copy; Fax PC: 215.799.1650 To my desk PC [email protected] Accu-Sort Systems Inc. 511 School House Rd. Telford, PA 18969-1196 USA >>> Peter Merguerian <[email protected]> 11/27 6:55 AM >>> Hello All, What's the latest on BCIQ? 1. Is KTL Ottawa still the only authorized lab outside Taiwan? 2. What is the fastest way to get the approval? 3. Is safety required by BCIQ? If so, what is acceptable (CB Test Report, UL Listing Report, CE Self Declaration file....). Looking forward to your responses. Peter Merguerian Managing Director Product Testing Division I.T.L. (Product Testing) Ltd. Hacharoshet 26, POB 211 Or Yehuda 60251, Israel Tel: 972-3-5339022 Fax: 972-3-5339019 e-mail: [email protected] website: http://www.itl.co.il TO LEARN ABOUT AUSTRALIAN AND NEW ZEALAND REQUIREMENTS, CONTACT ME AT THE EARLIEST STAGES OF YOUR DESIGN; REQUIREMENTS CAN BE TRICKY! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
