I have been asked by one of our mechanical engineers to look into conducting
the Hot Flaming oil test of IEC60950 based standards (reference to Annex
A.5) Has anyone had experience with this test especially in conducting or
witnessing the test (first hand experience)?
The standards specify the oil as being:
"distillate fuel oil which is a medium volitile distillate having a mass per
unit volume between 0.845 g/ml and 0.865 g/ml, a flash point between 43.5C
and 93.5C and an average calorific value of 38MJ/l."
In laymans terms...what type of oil will satisfy these requirements. Any
suggestyions on the test setup are also appreciated.
Regards,
Ken McCormick
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
