For our medical equipment we have used ASTM D4169-96 & D4728-95 and most recently ISTA Procedure 1 & 1A. The ISTA appears to be the more universally accepted standard. Good Luck!
-----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, August 31, 2000 3:28 PM To: [email protected] Subject: Vibration and Shock Testing This may not be the correct group to ask environmental questions, but I thought it was a good place to start considering so many in the group wear different hats or have past experience. In an effort to understand principles of shock and vibration compliance, I have searched companies like HP, Compaq and CISCO only to find if vibration and shock are called out it is not even the same within the same company. The task is to define the correct vibration and shock testing for electronic equipment, considering operational, non-operational and transportation will have different levels. Are there accepted existing standard like CISPR 22 and IEC 60950 for vibration, shock or other environmental parameters? Is there a similar group to this one that deals with environmental testing and compliance? Thank you in advance for time on this matter. Rick Linford [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
