Depends,
If you want a "Real Test Ball" with the hook, you can buy one from
Ergonomics, Inc.(800) 862-0102 P/N ITB15 for $140.00. If you don't need
the hook, you can get a chrome plated steel ball from McMaster Carr that is
50.8 mm in diameter and weighs 524 grams (within specification) for $16.21.
The P/N is 9528K71.
Daniel Mitchell
Product Safety Engineer
Condor DC Power Supplies, Inc.
[email protected] (Jim Bacher) on 03/21/2000 04:29:50 AM
To: "Jasmine TAN" <[email protected]>, [email protected]
cc: (bcc: Dan Mitchell/CondorDC)
Subject: Re:Steel Ball For Impact Test
forwarded for Jasmine TAN. Jim
____________________Reply Separator____________________
Subject: Steel Ball For Impact Test
Author: "Jasmine TAN" <[email protected]>
List-Post: [email protected]
Date: 3/21/00 6:53 PM
Hi,
Does anyone has any recommended source on "Steel ball" for Impact testing
as listed in UL60950.
Thanks for your recommendation.
Regards,
Jas
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
