We bought ours from a bearing manufacturer several years ago. It met the spec and was very cost effective ($6.00 rings a bell).
> ---------- > From: > [email protected][SMTP:[email protected]] > Reply To: [email protected] > Sent: Tuesday, March 21, 2000 7:29 AM > To: Jasmine TAN; [email protected] > Subject: Re:Steel Ball For Impact Test > > > forwarded for Jasmine TAN. Jim > > ____________________Reply Separator____________________ > Subject: Steel Ball For Impact Test > Author: "Jasmine TAN" <[email protected]> > Date: 3/21/00 6:53 PM > > Hi, > > Does anyone has any recommended source on "Steel ball" for Impact testing > as listed in UL60950. > > Thanks for your recommendation. > > Regards, > Jas > > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
