Tim, Thank you for the reference. I have downloaded the pdf files and will provide them to those that ask. BTW, these are a very good examples of how to do the calculations and measurements: clear, concise, understandable. Kudos to HP for this.
Scott [email protected] ECRM Incorporated Tewksbury, MA USA -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Tuesday, March 21, 2000 4:59 AM To: [email protected] Subject: Re: IEC 825 and Light Emitting diodes. Importance: Low Hi all, Have a look at the following Hewlett Packard documents. Application Brief I-009 Application Brief I-015 Application Note 1109 These might help answer the questions. Regards Tim ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
