The Keytek EMC Pro claims a transition time between 1 and 5 microseconds for IEC 1000-4-11. The generator is designed specifically for IEC immunity tests and it adheres to the standards fairly closely.
http://www.keytek.com/ http://www.keytek.com/emc/emcpro.htm Ted Eckert Regulatory Compliance Engineer American Power Conversion Corporation [email protected] The items contained in this e-mail reflect the personal opinions of the writer and are only provided for the assistance of the reader. The writer is not speaking in an official capacity for APC nor representing APC's official position on any matter. Please respond to [email protected] To: [email protected] cc: [email protected] (bcc: Ted Eckert/SDD/NAM/APCC) From: [email protected] on 01/24/2000 03:11 PM Subject: EN61000-4-11 EN 61000-4-11 states that the rise/fall time for a test generator used to perform a voltage abnormalities test (i.e. dips, variations etc should be between 1 and 5 microseconds.) Does anyone know of a generator that meets this criterion? I have come across a few but they typically cannot be programmed to work with rise/fall times less than 0.1 milliseconds(i.e. 100 microseconds). Thanks for your usual co-operation. John F. Whitfield --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
