Hi all, If a product transmit in a time period of 1 second pr hour, should it during conformity testing be in this normal transmit mode, or should it be set in a continuous transmitting mode which will be a kind of worst case situation, but anyway not a realistic situation when installed out on the field ?
I ask this question because the product will send 1 seconds burst on a powerline communication in the band 100kHz-400kHz and that will make problems for the Conducted emission test in the same frequency range. Best regards Amund Westin, Oslo/Norway ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
