Amund, In the US: you had most of it: RTCA/DO-160D For more info: http://www.rtca.org./
There may be other (additional) airframe specific requirements...which is not at all unusual! Daren A. Nerad EMC Engineer 815.226.6123 -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, October 25, 2001 7:07 AM To: [email protected] Subject: Aircrafts Hi all, Electrical equipment placed inside an aircraft (navigation equipment installed in the cockpit), are they required to fulfil the CE-regulations for use within EU? If yes, which directives apply ? EMC ? LVD ? What about in the US/Canada ? I have a feeling that RO-160D applies. Am I right ? Best regards Amund Westin ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
