#Which procedure should be followed for part 15, DoC or verification? #Compliance required to Class A or Class B? #If the board can be built in different kind of PC's, how is testing #performed? #To determine the max. frequency to test for, do I need the max. #internal PC frequency or the max. internal freq. of the board? #Will the EN 55022 results be accepted by an FCC lab?, can a European #CAB do the testing?
Kris, Computer peripherals that lie inside a computer must use the DoC procedure. Compliance requires Class B computing. All freq from 30 MHz to 1 GHz must be tested, that is all. Some results may be accepted by FCC lab, others might require in-house verification. Not sure if European CAB can do the testing (might need other accreditations such as A2LA). Feel free to call us for any advice or possible testing. Sincerely, Stuart Lopata Compliance Engineer Timco Engineering 352-472-5500 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
