Hello group,
A data acquisition board for building into a PC has been tested to the European
standard EN 55022, class B by an accredited testlab in Europe.
This configuration is not meant for a residential market and I suppose FCC part
15 is applicable.
Which procedure should be followed for part 15, DoC or verification?
Compliance required to Class A or Class B?
If the board can be built in different kind of PC's, how is testing performed?
To determine the max. frequency to test for, do I need the max. internal PC
frequency or the max. internal freq. of the board?
Will the EN 55022 results be accepted by an FCC lab?, can a European CAB do the
testing?
Any help is appreciated.
Regards,
Kris Carpentier
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
