"Aschenberg, Mat" wrote: > > Are there standards for testing of components on a pwb? > There is some concern here that we should be testing > individual components on the pwb. > > Thanks for your help. > Mat Aschenberg
Mat, The only thing I can find that's anywhere near to what you're asking is a Lucent standard. Lucent X-19435 Minimum requirement of 500v for all pins for modules operating at <200 MHz I have no experience with this standard at all, so I have no idea with what it's in reference to. - Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
