Bob, the -1 standard will not be published in the OJ since it is considered
to be a reference standard similar to the same status as the EN 61000-4
series. Since the test suite is contained in the -2 harmonized standard, you
no longer need to use a Notified Body.
Richard Woods
----------
From: [email protected] [SMTP:[email protected]]
Sent: Friday, September 14, 2001 9:43 AM
To: [email protected]
Subject: ETSI EN 300 330-X
ETSI EN 300 330-2, "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equipment in the
frequency
9 kHz to 25 MHz and inductive loop systems in the frequency range 9
kHz to
30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE
Directive" is
now a harmonized standard under the R&TTE Directive as it implies.
ETSI EN
300 330-2 calls out ETSI EN 300 330-1 as the standard to use for
test
limits, test procedures, etc. However, ETSI EN 300 330-1 is not
harmonized
to the R&TTE Directive.
The question is this: if we use ETSI EN 300 330-2 is show compliance
to the
R&TTE Directive, can we use ETSI EN 300 330-1 without having to
submit
through a Notified Body? It is my understanding that the use of any
standard that is not harmonized to the R&TTE Directive requires
intervention by a Notified Body to ensure the proper test suite
usage.
Bob Heller
3M Product Safety, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the
old messages are imported into the new server.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
