Bob, My understanding is that EN 300330-1 is a basic standard; EN 300330-2 is the calling standard. Similar to other basic standards, only the calling standards need to be announced (e.g., EN 50082-1 needs to be announced, not EN 61000-4-3).
Regards, Don Umbdenstock Sensormatic > ---------- > From: [email protected][SMTP:[email protected]] > Reply To: [email protected] > Sent: Friday, September 14, 2001 9:43 AM > To: [email protected] > Subject: ETSI EN 300 330-X > > > ETSI EN 300 330-2, "Electromagnetic compatibility and Radio spectrum > Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency > 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to > 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive" is > now a harmonized standard under the R&TTE Directive as it implies. ETSI EN > 300 330-2 calls out ETSI EN 300 330-1 as the standard to use for test > limits, test procedures, etc. However, ETSI EN 300 330-1 is not harmonized > to the R&TTE Directive. > > The question is this: if we use ETSI EN 300 330-2 is show compliance to > the > R&TTE Directive, can we use ETSI EN 300 330-1 without having to submit > through a Notified Body? It is my understanding that the use of any > standard that is not harmonized to the R&TTE Directive requires > intervention by a Notified Body to ensure the proper test suite usage. > > > Bob Heller > 3M Product Safety, 76-1-01 > St. Paul, MN 55107-1208 > Tel: 651- 778-6336 > Fax: 651-778-6252 > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old > messages are imported into the new server. > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
