I read in !emc-pstc that [email protected] wrote (in <88256AAB.00 [email protected]>) about 'Manufacturing Hipot Testing', on Fri, 17 Aug 2001: >A Hipot standard which we must run for CE compliance requires that >circuit-to-circuit and circuit-to-ground testing be performed on a routine >basis.
You don't tell us which standard you are applying. You may have misinterpreted it, but we can't tell. The 'routine' production-line 100% test is NOT intended to be a time- consuming process. The people who wrote the test procedure (which did not include me) do have *just a little* experience of volume production. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Eat mink and be dreary! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
