Yes. Regards,
Peter L. Tarver, PE Product Safety Manager Sanmina Homologation Services peter.tar...@sanmina.com > -----Original Message----- > From: owner-emc-p...@majordomo.ieee.org > [mailto:owner-emc-p...@majordomo.ieee.org]On > Behalf Of Stone, Richard A > (Richard) > > Group, > > can you substitute one large wire 6 awg. ( > handlles 63 amps. max ) > for two smaller wires ( 10 awg. carries 32 amps. > max. ) in Parallel. > They would 1/2 the current and disperse heat better. > > The accepting screw terminal would allow for > proper threading and tightness > of connection. > since you would have 2 ring lugs on one terninal > instead of two. > > thank you, > Richard, > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"