What happen, if one of these wire looses? Sérgio Rocha Loures Siemens Ltda. - Brazil Supply Chain - Quality and Engineering IC SC QE L Tel: +55 41 341-5755 Fax: +55 41 341-5058 E-mail: [email protected]
>>> "Stone, Richard A (Richard)" <[email protected]> 17/08/01 10:01 >>> Group, can you substitute one large wire 6 awg. ( handlles 63 amps. max ) for two smaller wires ( 10 awg. carries 32 amps. max. ) in Parallel. They would 1/2 the current and disperse heat better. The accepting screw terminal would allow for proper threading and tightness of connection. since you would have 2 ring lugs on one terninal instead of two. thank you, Richard, ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
