The standard does not say to extrapolate, but when we were in a similar situation with a product several years ago, the UL engineer and his reviewer agreed to use the extrapolation of the Creepage table. Always check with your agency person, since we have also found that what was acceptable to some, is not to others.
James Goedderz Sensormatic > ---------- > From: John Woodgate[SMTP:[email protected]] > Reply To: John Woodgate > Sent: Monday, July 30, 2001 2:04 AM > To: [email protected] > Subject: Re: Creepage dist. for more than 1000V ? > > > <000601c11881$36e04600$1e44d1d1@stella>, Vygovsky, Yury > <[email protected]> inimitably wrote: > >By interpolation the creepage for 1500v = 15mm or more, for 2000v=20mm or > >more. > > No, that would be extrapolation, and the standard doesn't say you can do > that. > -- > Regards, John Woodgate, OOO - Own Opinions Only. > http://www.jmwa.demon.co.uk > This message and its contents are not confidential, privileged or > protected > by law. Access is only authorised by the intended recipient - this means > YOU! > The contents may be disclosed to, or used by, anyone and stored or copied > in > any medium. If you are not the intended recipient, please advise the > sender > yesterday at the latest. > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
