Hello all !
I wonder how to specify creepage distance for Information Technology Equipment. Table 6 in UL1950 or EN60950 specifies minimum creepage of 10 mm for Working voltage = 1000 V, pollution degree 2, material group IIIb (basic insulation) linear Interpolation is permitted between nearest specified points. So how can one determine creepage distance for 1500 V, 2000 V ? Thanks in advance Israel Yeshurun Product Compliance. CreoScitex Corp. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"