<[email protected]>, Doug McKean <[email protected]> inimitably wrote: >The fan itself is more of an issue of having a baseline with >which to allow alternates to be used. If I can prove by >way of fan company documenation that the fan is x cfm, >then that's the basis for any other fan being used.
You should test for temperature rises with each proposed alternative part. Don't struggle to use cfm data that you can't get. -- Regards, John Woodgate, OOO - Own Opinions Only. Phone +44 (0)1268 747839 Fax +44 (0)1268 777124. http://www.jmwa.demon.co.uk Why not call a vertically- applied manulo-pedally-operated quasi-planar chernozem-penetrating and excavating implement a SPADE? ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
