I don't know if you "have" to fit a plug, but I can certainly tell you that our USA customers would be VERY UNHAPPY if we supplied a product without a plug. I certainly have the impression that fitting a plug in the USA is not something that people expect to have to do.
Regards, John Crabb, Development Excellence (Product Safety) , NCR Financial Solutions Group Ltd., Kingsway West, Dundee, Scotland. DD2 3XX E-Mail :[email protected] Tel: +44 (0)1382-592289 (direct ). Fax +44 (0)1382-622243. VoicePlus 6-341-2289. -----Original Message----- From: Enci [mailto:[email protected]] Sent: 17 May 2001 08:03 To: [email protected] Subject: Re: US Mains Plug/Earthing Thank you for all your comments. Do EU manufacturers have to fit a suitable mains plug to appliances when exporting to USA?... or can it be supplied without a plug, putting the requirement on the user to follow the instructions - in my case, stating that a grounding plug must be used ? Thank you. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
