<d74c689b5f7fd211887700e0292651ec08287...@scatrnte01.canada.ncr.com>, Mowbray, John H <[email protected]> wrote: >If these products are in a European warehouse then they can be sold as they >are presently in the distribution system, but if the warehouse is outside of >the EU then they must comply with the new requiremetns to be sold after July >1, 2001.
I do not think that applies if the warehouse belongs to the manufacturer and the products have not been invoiced. In fact, if you think about it, it cannot possibly apply. A manufacturer, fearing the effects of new requirements, could make (or claim to have made!) and store 2 years' sales before the deadline and thus continue to ship non-conforming product for 2 years after it. -- Regards, John Woodgate, OOO - Own Opinions Only. Phone +44 (0)1268 747839 Fax +44 (0)1268 777124. http://www.jmwa.demon.co.uk Why not call a vertically- applied manulo-pedally-operated quasi-planar chernozem-penetrating and excavating implement a SPADE? ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
