caps in for cs01, may remove for cs02, you use a blocking choke there so doesn't factor in, cs06 in for series injection out or blocked by inductor for parallel injection. call me for rationale, too complex for e-mail
in for all other tests except where LISN required in lieu ---------- >From: [email protected] >To: [email protected] >Subject: Mil 461a/b/c >Date: Tue, May 8, 2001, 11:04 AM > > > Can anyone advise! > > When testing to mil 461a/b/c for airforce, emissions are done using 10uF > Capacitors in-line between the supply source and the unit under test (1 > metre from the EUT). LISNs are used for army and have only been incorporated > for airforce equipments in 461d/e. > > Are the 10uF Caps supposed to be removed for immunity tests such as CS01, > CS02 and CS06? > If so what is the reasoning for doing it? > > The test set ups in 462 isn't clear on this subject and test houses that I > have spoken to tend to leave them in for both emission and susceptibility > testing. > > Regards > > Andy Price > > > **************************************************************************** ********* > * > > This email and any attachments are confidential to the intended > recipient and may also be privileged. If you are not the intended > recipient please delete it from your system and notify the sender > immediately by telephoning +44(1252) 373232. You should not copy it or > use it for any purpose nor disclose or distribute its contents to any > other person. > > **************************************************************************** ********* > * > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
