Collogues,
In this specification, is it stated anywhere if the unity field is a
volume ( 1 cubic meter) or is it a plane location (the calibration plane)?
I'm having questions raised about rotating the EUT (in 90 degree increments)
(which now has us over testing the EUT because it is closer to the antenna
by 0.3m at the 90 degree point) or under testing when tested at 270 degrees?
I thought I had read somewhere that the unity field was the 1 cubic meter
box at the (80cm) table top centered and aligned with the calibration plane?
> Michael Sundstrom
> Product Test Technician EMC
> Nokia Mobile Phones, Dallas PCC
>
> * Email [email protected]
> % Desk (972) 374-1462
> *Mobile (817) 917-5021
> * Fax (972) 374-0901
amateur call: KB5UKT
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
