Richard, all, I prefer the HP (now Agilent?) datalogger series over Fluke's. More channels, (my model has 3 bays of 22 channels each), included software allows for any normal type of thermocouple, as well as voltage or resistance measurements. Connects to PC with serial cable, uses minimal resources (our dedicated PC is a 486, 33MHz, with Win 3.1, and it runs fine (set up this way years ago, and I haven't needed to upgrade it.)
Sam -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Chris Chileshe Sent: Tuesday, May 07, 2002 5:37 AM To: [email protected] Subject: RE: Thermal Testing I have found the Pico data logger (with type K thermocouples) ideal for my requirements. It connects between about 8 thermocouples ( I use type K) and a PC ( RS232 ). http://www.picotech.com/thermocouple.html Regards - Chris Chileshe - Ultronics Ltd -----Original Message----- From: [email protected] [SMTP:[email protected]] Sent: Monday, May 06, 2002 7:14 PM To: [email protected] Subject: Thermal Testing Do any of you monitor and record component temperatures during safety testing using PCs and data capture I/O cards? If so, what hardware and software to you use? Richard Woods Sensormatic Electronics Tyco International ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________ ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________ ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
