richwo...@tycoint.com wrote: > > Do any of you monitor and record component temperatures during safety > testing using PCs and data capture I/O cards? If so, what hardware and > software to you use?
I do any monitoring any temp testing with a Fluke Hydra II and associated PC software. Set up and define probes, start software, dump into an Excel spreadsheet or report. Communication between the Fluke and the PC is done through serial ports. - Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
