Section 10 of ANSI C63.4 covers what must be in a test report. It's important to have an accurate description of what was tested, including photographs. The intent is that the report should be complete enough to reproduce the test a year from now. Sounds simple... but it's not.
Mike -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, April 25, 2002 6:18 AM To: [email protected] Subject: EMC test report Hi All, Does FCC require that all that information be in the final report. Such as Product Manufacturer, Table of Contents, Equipment Units Tested, Equipment and Cable Configuration, List of Test Equipment( calibration data), Location of Test Site, Measurement Procedures, Reporting Measurement Data, Summary of Results... The reason I ask is that it states that "Digital devices ..are to be measured for compliance using the following procedure..." it doesn't say that it needs to be in the final summary. Thanks Cecil ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
