Hi All, Thanks everyone who replied and offerred their suggestions regarding this topic.
Praveen > > I'm trying to setup a programme to compare test results (for > Radiated Emissions) between test labs. The plan is to circulate a > "Artifact" around the labs and compare the results. The test sites being > compared are Semi-anechoic Chambers v/s OATS. The source used is a > wideband "RF comb generator". I would like to understand the concept > fully before I initiate this programme. Is there any information readily > available on this topic? Any help will be greatly appreciated. Thanks. > Praveen Thanks for the response. The purpose is to test both, the facility (semi-anechoic v/s OATS) and the quality of results. The comb generator is my first approach. A standard test sample(with cables) will follow. Any procedures, data, results, experience.... on this issue ? ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.