So where do I drill the hole in my fuel injection system? John
-----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Doug McKean Sent: Friday, January 04, 2002 2:37 PM To: EMC-PSTC Discussion Group Subject: Re: EMC-related safety issues RE: EMC-related safety issuesKyle Ehler wrote: > > Another point of trivia is that a fresh oil change and new air filter > prior to having your vehicle smog tested will improve the emissions > results. At one time there was available OTC a fuel additive that one > could deploy to further skew the results in your favor. I knew a guy who drilled a small hole in the side of his carborator, attatched a hose setup that you would use for an acquirium the other end of which was put into a water bottle. While the car was in idle, he'd adjust a valve on the hose to a slow drip of water into the carborator. This setup was on an old truck of his and he always got terrifically low emissions readings. - Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
