Hi Susan,

We found that a McIntosh MC2100 (industrial packaged dual 100 Watt version
amplifier) bridged works well for MIL-STD-461 CS101 Tests. This arrangement
meets the required 2 Ohm source impedance. This paired up with the Solar
Audio transformer can produce surprising amounts of current and includes the
required amplifier protection (transformer coupled output).  

They can also be used for transient investigations as well.

Philip Ross Wellington
Mgr. Signal Integrity & EMI
L-3 Communications CSW


-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Friday, July 19, 2002 8:25 AM
To: [email protected]
Subject: suggestion for >100W audio amp



Hello group,
I was hoping that someone could suggest a vendor/model number for an > 100
W audio amplifier for use performing DO-160D, change 2, section 18 audio
susceptibility testing.  I am currently using an old Solar 6552-1A, but
sometimes it can't provide the pre-calibrated power (100W) into the EUT.
It could also be used for 461E CS101 testing.

Thanks in advance,
Susan Beard



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to