I read in !emc-pstc that John Woodgate <[email protected]> wrote (in <[email protected]>) about 'Conducted noise emission diagnosis device', on Tue, 5 Feb 2002: >If C is the common-mode (CM) component and D is the differential-mode >(DM) component (both in linear units, not decibels), then one output of >the LISN gives C + D and the other gives C - D. This follows from the >definitions of CM and DM.
Correction. The outputs are 2(C+D) and 2(C-D). -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk After swimming across the Hellespont, I felt like a Hero. PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
