I read in !emc-pstc that Barker, Neil <[email protected]> wrote (in <[email protected]>) about 'CE Mark vs. e-Mark' on Wed, 9 Oct 2002: >The second draft of the Revised Guidelines from LVD, published in May 2000 >following the Think Tank Meeting of 27th January 2000, included the >statement, > >"Following discussions it has been agreed that the term "designed for use >with a voltage range" shall be understood at equipment having either a rated >input voltage or a rated output voltage inside this voltage range, >Internally there may be higher voltages." > >If anybody knows that this has subsequently been removed, then I am sure >that we would all like to know.
I have been told that there is a February 2001 document that is worded differently, but means the same. I had a draft of that in which the word 'output' was missing. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
