Jan, one of the items that makes it confusing is, that you submit a test reports (EMC and CB) with the unit to be tested. That makes it look like they accept the reports when they do not. I believe that the reports are used to duplicate the tests.
As for wireless, it is the MII that does the radio certifications. Jim Jim Bacher, Senior Engineer Paxar Americas, Inc. 170 Monarch Lane Miamisburg, Ohio 45342 USA e-mail: [email protected] voice: 1-937-865-2020 fax: 1-937-865-2048 From: Jan Vercammen [mailto:[email protected]] Sent: Tuesday, February 25, 2003 10:19 AM To: [email protected] Subject: CCC mark China Hello, I have some questions concerning the CCC mark in China with respect to EMC and radio spectrum matters. -1- I receive contradicting information about EMC compliance in China. On one hand I have information which asserts that China recognizes EMC laboratories outside China. For Belgium these are CEBEC recognised laboratories. On the other hand I also have information that this is not correct and that products need to be retested by CCC recognised lab's, which are located in the Asian area (China region - I have a list of lab's). What is correct? -2- I have checked the CCC classification. It does not look complete (yet). It could be that our product does not fit the classification list (yet). -3- We have a product tested according to IEC 60601-1-1 (safety) and IEC 60601-1-2 (EMC). Can anyone explain what one should do to obtain the CCC mark in simple terms. -4- The product also includes a short range device (SRD) operating at 13.56MHz. It has been tested according to ETSI 300330 (radio parameters) and ETSI 301 489-3 (radio EMC) and FCC part 15. The same question as in -3-, what one should do to obtain the CCC mark. It does not get easier! Kind regards, Jan Vercammen Agfa-Gevaert NV, Belgium This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
