Jan, I can answer the first part of your question. In October 2002, I attended a presentation given by representatives of China's CNCA. At that time, plans existed to eventually certify labs outside of China, but it was not expected to occur in the foreseeable future. Note that this was an official government delegation so the answer was straight >from the horse's mouth.
Having said that, there are many agencies outside of China who will escort your product through the process (in China) and can apparently do so fairly quickly. Best Regards, Dave Heald PS - ADMIN NOTE - replies offering services of this nature should be sent to the intended recipient only and should not be copied to the list. Jan Vercammen wrote: > > Hello, > > I have some questions concerning the CCC mark in China with respect to EMC > and radio > spectrum matters. > > -1- I receive contradicting information about EMC compliance in China. On > one hand I have > information which asserts that China recognizes EMC laboratories outside > China. For Belgium these > are CEBEC recognised laboratories. On the other hand I also have > information that this is not correct > and that products need to be retested by CCC recognised lab's, which are > located in the > Asian area (China region - I have a list of lab's). What is correct? > > -2- I have checked the CCC classification. It does not look complete > (yet). It could be that our > product does not fit the classification list (yet). > > -3- We have a product tested according to IEC 60601-1-1 (safety) and IEC > 60601-1-2 (EMC). > Can anyone explain what one should do to obtain the CCC mark in simple > terms. > > -4- The product also includes a short range device (SRD) operating at > 13.56MHz. It has been > tested according to ETSI 300330 (radio parameters) and ETSI 301 489-3 > (radio EMC) and FCC > part 15. The same question as in -3-, what one should do to obtain the CCC > mark. It does not > get easier! > > > Kind regards, > > Jan Vercammen > Agfa-Gevaert NV, Belgium > > > > > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
