Hello,
I have some questions concerning the CCC mark in China with respect to EMC and radio spectrum matters. -1- I receive contradicting information about EMC compliance in China. On one hand I have information which asserts that China recognizes EMC laboratories outside China. For Belgium these are CEBEC recognised laboratories. On the other hand I also have information that this is not correct and that products need to be retested by CCC recognised lab's, which are located in the Asian area (China region - I have a list of lab's). What is correct? -2- I have checked the CCC classification. It does not look complete (yet). It could be that our product does not fit the classification list (yet). -3- We have a product tested according to IEC 60601-1-1 (safety) and IEC 60601-1-2 (EMC). Can anyone explain what one should do to obtain the CCC mark in simple terms. -4- The product also includes a short range device (SRD) operating at 13.56MHz. It has been tested according to ETSI 300330 (radio parameters) and ETSI 301 489-3 (radio EMC) and FCC part 15. The same question as in -3-, what one should do to obtain the CCC mark. It does not get easier! Kind regards, Jan Vercammen Agfa-Gevaert NV, Belgium This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
