I read in !emc-pstc that Gordon,Ian <[email protected]> wrote
(in <E1BA0362B28ED211A1E80008C71EA3060206FBB9@EXC_EAS01>) about
'DERIVATION OF CREEPAGE AND CLEARANCES' on Fri, 25 Apr 2003:
>Does anyone know from where the values for creepage and clearances given in
>EN61010-1 ("safety requirements for electrical equipment for measurement,
>control and laboratory use - part 1 general requirements") are derived i.e.
>are there other standards "below" 61010 in this respect?
Look at IEC 60664 (multi-part).
--
Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk
Interested in professional sound reinforcement and distribution? Then go to
http://www.isce.org.uk
PLEASE do NOT copy news posts to me by E-MAIL!
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
