Creepage & Clearance distances in many IEC/EN standards including IEC61010-1 and thereby EN61010-1 are drawn from IEC60664-1: Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests.
Bill Bisenius ED&D [email protected] www.productsafeT.com -----Original Message----- From: Gordon,Ian [mailto:[email protected]] Sent: Friday, April 25, 2003 5:11 AM To: 'IEEE EMC-PSTC GROUP' Subject: DERIVATION OF CREEPAGE AND CLEARANCES All Does anyone know from where the values for creepage and clearances given in EN61010-1 ("safety requirements for electrical equipment for measurement, control and laboratory use - part 1 general requirements") are derived i.e. are there other standards "below" 61010 in this respect? Thanks Ian Gordon _____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
