> Most of you guys are probably familiar with the field wiring requirements > that ITE products must comply with. (mainly for DC powered units) > > When a unit does not comply and the terminal block is not suitable for > field wiring than a manufacture has an option of using 6" leads (not a > very favorable option but it is an option) or redesign of the power > interface. > > A solution to this problem can be provided with an external box, which > will be sold with the unit. The box clearly must comply with all the > requirements of UL60950 (Terminal block suitable for filed wiring, > electrical enclosure, access to Hazardous energies, etc.). > > Does any one know of connection boxes like that that are off the shelf and > are UL approved for filed wiring? > Any other ideas? > > Regards > > Ilan > > ---------------------------------------------------------- > Ilan Cohen > Technical Director, Safety & Telecom Divisions > I.T.L (PRODUCT TESTING) Ltd. > 26 Hacharoshet St, POB 211, Or Yehuda, Israel. > Tel 972-3-5339022, Fax 972-3-5339019 > [email protected], website: http://www.itl.co.il > ------------------------------------------------------------ > >
This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
