Most of you guys are probably familiar with the field wiring requirements that ITE products must comply with. (mainly for DC powered units)
When a unit does not comply and the terminal block is not suitable for field wiring than a manufacture has an option of using 6" leads (not a very favorable option but it is an option) or redesign of the power interface. A solution to this problem can be provided with an external box, which will be sold with the unit. The box clearly must comply with all the requirements of UL60950 (Terminal block suitable for filed wiring, electrical enclosure, access to Hazardous energies, etc.). Does any one know of connection boxes like that that are off the shelf and are UL approved for filed wiring? Any other ideas? Regards Ilan Ilan Cohen Technical Director, Safety & Telecom Divisions I.T.L (PRODUCT TESTING) Ltd. 26 Hacharoshet St, POB 211, Or Yehuda, Israel. Tel 972-3-5339022, Fax 972-3-5339019 [email protected], website: http://www.itl.co.il This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
