The US and Canadian National Electrical Codes requires the plug for ITE to be rated for at least 125% of the load. That is origin of the "80%." See NEC Article 645.5.
Richard Woods Sensormatic Electronics Tyco International From: Gonzalez, Kenneth P (Rocky) [mailto:[email protected]] Sent: Wednesday, April 30, 2003 6:10 PM To: [email protected] Subject: AC outlet max current Group It was my understanding that one could only draw 80% of the max current from an AC wall outlet. Is this true? Where does the NEC specify this? Thanks to all, Kenneth Gonzalez Intergraph Solutions Group This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
