Peter- This appears to be a case of not reading the standard. Please buy a copy and read it.
Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA [email protected] > From: Peter Horvat > Sent: Thursday, June 26, 2003 6:37 AM > > Hi, > > Can anyone explain the electrical strength > requirements for PC power > supplies (input/output) to comply with EN60950. > Does basic insulation or > reinforced insulation apply? Particularly in the > case that the PC > peripherals and male D-sub connectors (that can > come in contact with users) > are only basic insulated PS suitable. > > I found that most power supplies available on the > market are only tested at > 1500VAC between in/out. > > Thank you in advance for your help, > > Peter Horvat > CAE Inc. > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
