Hi Colleagues, What are the marking requirements for a product (an ESA) that has met the Automotive Directive, 95/54/EC, to be fitted in a vehicle? I always thought that all that was required was the e mark. However, our colleagues in Germany have came across several products that are marked similar to what I have attached here:
example for the "e"- number : e1 020148 (e1---> number of the country, 1=germany ; 02---> revision of the EU-confirmation "95/54/EU" ; 0148----> permit number Is this type of marking required? Is it different per European Country i.e. if it is 1 for Germany what are the numbers for all the other countries? Has anyone got good information? I look forward to your kind replies. Kind Regards Alex McNeil Principal Engineer Tel: +44 (0)131 479 8375 Fax: +44 (0)131 479 8321 email: alex.mcn...@ingenicofortronic.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc