If you go to the VCA website, you will find a whole load of downloadable documents that cover most aspects. Here is the link to that part of the website. http://www.vca.gov.uk/vehicle/specific-publication.shtm
Best regards, Neil R. Barker Compliance Engineering Manager e2v technologies ltd Waterhouse Lane Chelmsford Essex CM1 2QU U.K. Tel: +44 (01245) 453616 Fax: +44 (01245) 453410 E-mail: [email protected] > -----Original Message----- > From: Alex McNeil [mailto:[email protected]] > Sent: 13 June 2003 08:41 > To: [email protected] > Subject: The e Marking requirements > > > > Hi Colleagues, > > What are the marking requirements for a product (an ESA) that > has met the > Automotive Directive, 95/54/EC, to be fitted in a vehicle? I > always thought > that all that was required was the e mark. However, our colleagues in > Germany have came across several products that are marked > similar to what I > have attached here: > > example for the "e"- number : > e1 020148 (e1---> number of the country, 1=germany ; > 02---> revision of > the EU-confirmation "95/54/EU" ; 0148----> permit number > > Is this type of marking required? Is it different per > European Country i.e. > if it is 1 for Germany what are the numbers for all the other > countries? Has > anyone got good information? > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
