The duration of test should not relate with derating of test voltage.

The purpose of dielectric test is to check for any insulation breakdown.
Like for production line test, it is allow to reduce the test duration to
1s, but it test at the same voltage as in 1 minute test

Cheng-Wee Lai


From: [email protected]
[mailto:[email protected]]On Behalf Of Miguel Abrahams
Sent: Thursday, June 12, 2003 9:01 AM
To: '[email protected]'
Subject: Electric strength test



I am looking for any technical information relating the voltage level and
the applied time of the test signal in an electric strenght test.
I want to find out how a dielectric test carried out at 2500Vac applied for
5 minutes compares to one carried out at 3000Vac applied for 1 minute.

Thanks,

Miguel Abrahams
CAE Inc.





This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc




This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to