This scenaro comes up often in our designs. We typically use 0.010 or 0.020 inch thick Nomex (vulcanized fiber) instead of plastic. The Nomex is UL recognized, 94V-0, very low cost and can be bought in sheets or punched to the exact size.
Thanks, Bryan. From: [email protected] To: [email protected] Sent: 8/12/03 1:55 PM Subject: 94V-0 question I need a sheet of plastic that goes between a PCB and a metal enclosure. This is to make a creepage spec. What plastics are good for this? Will polycarbonate be suitable and have a 94V-0 rating? Thanks. Dave Cuthbert Micron Technology This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
